before buying expensive routers check OpenWRT’s table of hardware and buy one that is supported by the current OpenWRT release and has decent specs. There is a detailed installation guide for each supported device in the wiki too so there are no excuses it’s dead simple. Free yourself from stupid hardware manufacturers and their planed obsolescence products.
- Edit: also here is the new version of the table of hardware with more details They seem to have buyers guide too in the wiki.
- Edit2: seems like GL.iNet devices ship with OpenWRT out of the box with their GUI on top and you still have access to openwrt under the hood if you need it which sounds awesome so look into them if you’re interested. Thanks you guys who brought them up.
- Edit3: there is firewall sulotion called OPNSense which is not limited to commercial routers like OpenWRT and can be run on any x86 hardware of your choice (like N100 mini pcs) so look into it if you’re interested. Many thanks to the guys who contributed in the comments
- Edit4: Sorry for the multiple edits but some of you guys suggest some fantastic insights that I had to add. Anyways here is a list of good candidate devices for hassle free installation and yet powerful enough hardware from OpenWRT’s Forum
- I promise it’s gonna be the last Edit. OpenWRT has a official device they made themselves called OpenWRT ONE (I think the second one is also in the works). It hase good specs for home network and you support the project too. Here is the link to official Retailers
I just bought the openwrt one a couple of minutes ago after using networkd+hostapd+nixos as my router for more than 2 years.
How was your experience with it?
It was pretty good. Unfortunately, I had to resell it, because I wasn’t able to put my ISP router into bridge mode.
Good to know, a pity about the ISP
deleted by creator
That’s interesting like which devices? Could you elaborate
deleted by creator
deleted by creator
deleted by creator
I disagree. Your machine should be setup such that you don’t have to trust the network that you connect to.
With multi-layered defense you should protect your network, but not trust that you always succeed.
I bought a Dlink because it was cheap and was high end hardware. You can’t even add a firewall rule without adding a backdoor to Dlinks cloud portal.
Big mistake obviously.
Mikrotik with RouterOS for European-made router without chinese backdoor
I honestly don’t know much about Microtik’s RouterOS but in a few occasions I had I realised it is way too complicated for home user and their OS is not FOSS and needs payed license too. I’m sure it’s great once you get the hang of it but it’s unnecessary pain when there is OpenWRT available with a lot of devices you can choose not just one specific manufacturer
Mikrotik is proprietary, and has a bad security track.
Mikrotik is such pain in the dick. Not used them in the last 5 years but hated working with them in the past.
This. I cringe whenever I see someone using an ASUS or TPLINK.
ASUS [routers] are fine. I’ve been using them for years (several models, lately their ExpertWifi EBM68). What’s the issue?
Are the laptops an issue too?
I remember the majority of routers in the past could not handle many half-open connections which had very negative impact on torrenting. Asus routers were the only ones that didn’t have that limit and i stuck with them since. Is that still a problem that exists?
I have port forwarding setup on my devices (Google WiFi running OpenWRT). I can connect to most piers on qbitorrent. My only limit seems to be my bandwidth Which is what we want.
Thank you, though that doesn’t really answer my question. Torrenting also worked back then but it would become slower than a router that could handle more half-open connections. If you have fast peers and a small number of torrents, it would probably not matter, but if you seed 100+ torrents at the same time, you’d notice.
Also powerful but I reckon if you’re at this level then you already know about it; https://opnsense.org/
As a matter of fact I heard about them but I don’t know much about OPNSense. Do they support devices other than ones they sell? They seem to be rather about professional environment not home network am right?
It supports any x86 device you throw at it. I’m running it on a hodgepodge PC I built out of scrap.
Damn I’m sold next step I gonna look into them
Basically OpenWRT is for dedicated, purpose built hardware, highly compact and essentially “embedded”. OPNSense is for running a (potentially much more capable) firewall on x86/x64 (even if it’s a small specimen like N100 or whatever). They fill a somewhat different role.
Well explained. I get it now
Any recs for a OpenWRT-supported router? The list is pretty deep
deleted by creator
I don’t see LibreCMC (https://librecmc.org/) mentioned anywhere in this thread, so correct that.
Unlike Open WRT, LibreCMC is recognised by GNU to be a fully free Linux distribution, and you still get the time-honoured LuCi web administration interface.
LibreCMC runs on much fewer devices as OpenWRT, which can be a feature for those who are overwhelmed by the length of OpenWRT’s list.
deleted by creator
