Btrfs doesn’t have encryption, so you need to do it with luks to an mdadm raid, and build btrfs on top of that. Luks on mdadm raid is known to be slow, and in general not a great idea.
Why involve mdadm? You can use one btrfs filesystem on a pair of luks volumes with btrfs’s “raid1” (or dup) profile. Both volumes can decrypt with the same key.
The baby god event was never officially released, so this actually didn’t canonically happen.
It was released. The Azure Flute and the event where you meet and battle Arceus in the Hall of Origin in DPPt was indeed never released, but this is different.
Arceus had various distributions in 2009-2010; the US one was at Toys R Us for example. Trading that legit Arceus to HGSS and then bringing it to the Ruins of Alph triggers this event which takes you to a special location where you can choose one egg of either Dialga, Palkia, or Giratina.
The conditions that processors run under in situations like military equipment are drastically different from those of consumer devices. Consistency and stability are more important than performance in those contexts. So much so that RTOS systems like VxWorks are popular in that space. They’d probably already have features like clock boost disabled (or use processors completely lacking it) in favor of a lower fixed clock speed, probably avoiding these issues entirely.
and it’s free
This is very uncommon in the US. Most major banks (I’m not aware of any exceptions) charge a fee for each outgoing wire transfer, usually $25-$30. Bank of America, Wells Fargo, Chase, and PNC for just a few examples I’m aware of, plus every credit union that has local branches in my area. Some of those banks even add a second fee at the recipient’s side for incoming wire transfer.
They often encourage customers to rely on third party services like Zelle instead for small transfers to friends and family. Many banks’ sites/apps can also handle transfers between two accounts that both belong to the same bank for free too.
A standard called SystemReady exists. For the systems that actually follow its standards, you can have a single ARM OS installation image that you copy to a USB drive and can then boot through UEFI and run with no problems on an Ampere server, an NXP device, an Nvidia Jetson system, and more.
Unfortunately it’s a pretty new standard, only since 2020, and Qualcomm in particular is a major holdout who hasn’t been using it.
Just like x86, you still need the OS to have drivers for the particular device you’re installing on, but this standard at least lets you have a unified image, and many ARM vendors have been getting better about upstreaming open-source drivers in the Linux kernel.
To the contrary, I would expect the sample to skew more towards people who have a heavily customized X session and strong opinions about window managers while drastically underrepresenting average GNOME users who stick with the default Wayland session. Someone who likes their custom setup can still be waiting for a Wayland equivalent while casual Ubuntu users have been defaulted to Wayland on new non-nvidia installs since early 2021.
I tried to do this a while ago with a GNOME system, setting GDM to automatically log me in, but I ended up always getting prompted for my password from gnome-keyring shortly after logging in which seemed to defeat the point. If you use GNOME, you might want to look at ArchWiki’s gnome-keyring page which describes a couple solutions to this problem (under the PAM section) which should be applicable on any systemd distro.
A ground-up overhaul of the copyright system would make things so much worse, not better, considering the current climate of power. In the US for example, MPA, RIAA, Entertainment Software Association, Association of American Publishers, and others wouldn’t want public libraries or the used market to exist at all; they would push for making every single transfer of “ownership” on any media involve a payment to the rights holder. Lawmakers are far more likely to accommodate those groups’ desires than the public good.
The worst parts of the current copyright system are the most recent. Both the DMCA and the extension of US copyright term to 95 years took effect in 1998, and the early 2000s saw many other countries passing laws to make their copyright system closer to US’s in various ways such as the WIPO Copyright Treaty which took effect in 2002 and EU’s 2006 Copyright Directive. Just about the only positive news we’ve seen in US copyright law since then is in temporary exemptions to DMCA’s anti-circumvention rules (Section 1201) which change every year. Copyright law was far less hostile to consumers and the public before the 90s than it is now, and up until 1976 it used to be expected that most media someone consumes would enter public domain within their lifetime.
The digital era makes market relevance far more ephemeral than ever and yet the laws written for the digital era moved copyright in the opposite direction. Movie studios simultaneously judge whether a film succeeded almost exclusively based on its first week of ticket sales and also claim that depriving public domain for 95 years is necessary. Nothing should be able to justify more than 20 years of copyright. Media formats don’t even last as long as copyright; CDs and DVDs rot, game cartridges die, servers shut down, and even books printed on today’s low-quality paper will fall apart.
Some of it is absurd to me, like the way something can be online but geographically restricted.
This is a consequence of contract terms moreso than copyright. One issue in copyright law that this does connect to, though, is the fact that the question of whether the rightsholder keeps a work reasonably available on the market does not impact whether the work retains copyright protections. If copyright law did hypothetically include that limitation, providers would become far more likely to make sure that all content is available in all countries, but even then things could still vary in terms of which content is on which platform.
There’s only one case I’ve found where Wi-Fi use seems acceptable in IoT: ESPHome. It’s open-source firmware for microcontrollers that makes DIY IoT sensors and controls accessible over LAN without phoning home to whatever remote server, without trying to make anything accessible over the Internet, and without breaking in any way if the device has no route to the Internet.
I still wouldn’t call Wi-Fi use ideal even there; mesh can help in larger homes and Z-Wave/Zigbee radios tend to be more power efficient, though ESP32 isn’t exactly suited for a battery-powered device that’s expected to run 24/7 regardless.
Yes.
My home server has dropbear-initramfs installed so that after reboot I can access the LUKS decryption prompt over SSH. The one LUKS partition contains a btrfs filesystem with both rootfs and home as subvolumes. For all the other drives attached to that system, I use ZFS native encryption with a dataset that decrypts with a keyfile from that rootfs and I have backups of an encrypted copy of that keyfile.
I don’t think there’s a substantial performance impact but I’ve never bothered benchmarking.
Something I’ve noticed that is somewhat related but tangential to your problem: The result I’ve always gotten from using compose files is that container names and volume names get assigned names that contain a shared prefix by default. I don’t use docker and instead prefer podman but I would expect both to behave the same on this front. For example, when I have a file at nextcloud/compose.yml that looks like this:
volumes:
nextcloud:
db:
services:
db:
image: docker.io/mariadb:10.6
...
app:
image: docker.io/nextcloud
...
I end up with volumes named nextcloud_nextcloud and nextcloud_db, with containers named nextcloud_db and nextcloud_app, as long as neither of those services overrides this behavior by specifying a container_name. I believe this prefix probably comes from the file-level name: if there is one and the parent directory’s name otherwise.
The reasons I adjust my own compose files to be different from the image maintainer’s recommendation include: to accommodate the differences between podman and docker, avoiding conflicts between the exported listen ports, any host filesystem paths I want to mount in the container, and my own preferences. The only conflict I’ve had with other containers there is the exported port. zigbee2mqtt, nextcloud, and freshrss all suggest using port 8080 so I had to change at least two of them in order to run all three.
I have configured custom Android kernel builds to enable more USB drivers, enable module support, and tweak various other things. For one tangible example of the result: I could plug in a USB Wi-Fi adapter and use it to simultaneously connect to another Wi-Fi network with the internal NIC while also sharing my own AP over USB. On an Android device of all things. I have also adjusted kernel builds for SBCs (like Pi clones) to get things working at all.
I have never seen any reason to configure a custom kernel for my own desktop/laptop systems. Default builds for the distros I’ve used have been fine for me; if I’m ever dissatisfied with anything it’s the version number rather than the defconfig. The RHEL/Rocky kernel omits a few features I want (like btrfs) but I’d rather stick to other distros on personal systems than tweak a distro that isn’t even meant for tweaking.
I never had problems with Debian stable, especially on headless server. But it’s not especially well-suited for brand new desktop hardware; even Ubuntu LTS and RHEL focus more on hardware enablement backports than Debian.
I’ve had a worse experience with Debian testing breaking my system with updates than Arch. Adding to that the freeze period (2012’s was the worst, lasting 11 months) makes testing feel like the worst of both worlds between rolling and standard release distros.
I recommend giving dnf the -C flag to most operations, particularly those that don’t involve downloading packages. The default behavior is often similar to pacman’s -y flag and so the metadata sync ends up slowing everything down by orders of magnitude.
I’ve long known about it. I don’t seriously use it, but I would if only my Wi-Fi router was fully supported. It’s an Asus one (that I got for free from T-Mobile a decade ago) so I installed Asuswrt-Merlin on it instead.
Following the recommendation of homelab communities, I got into OpnSense (a BSD-based firewall system for x86 hardware only) last year, still keeping my Wi-Fi router as a dedicated AP. In hindsight I somewhat regret that choice and probably would’ve been better off buying a new OpenWRT-compatible router and using it to handle firewall/routing/AP all in one device instead of wasting the power draw of another separate N100 system. I like having wireguard and vnstat in my router now, which Merlin didn’t offer, but I know OpenWRT has those too and I don’t have any other needs that warrant a higher-power router.
As someone who used to use Arch a decade ago: I still use pacman for devkitpro at least, and I do miss how fast its parallel downloads get, but the tool I use to manage packages is far from the most important difference between distros to me, even if you assume not needing AUR.
I’ve been using it since it felt usable enough in GNOME to me. Around 2015-ish, give or take a year. GNOME leading on Wayland support is a big part of why I switched to it from Xfce back then. Nowadays KDE and others have plenty good Wayland support too (better in some ways like allowing server-side decorations and global shortcuts) but I just haven’t felt like trying to properly experiment to see what I like.
I’ve always avoided Nvidia on my desktops. Stuck with either radeon or intel and never had any exceptionally big issues with them on Wayland. Though other things like hardware accelerated video decoding have had a history of being spotty on some drivers/GPUs.
The readme file, gitmodules file, and other links within that repo all still reference the now-dead gitlab links. The builds don’t seem to be present at all.
That will all probably be fixed soon enough but right now that mirror which seems to have just been pushed as-is isn’t entirely usable.
The first I tried was Ubuntu 7.04 but I didn’t stick with it and went back to XP. Until I ended up with a hardware setup that wouldn’t work on Windows XP (widescreen monitor + Intel graphics driver with no widescreen mode options) but worked perfectly on Ubuntu 9.10. I never truly went back to Windows since.
Tried a few other distros in 2011 then switched to Arch for a couple years, Xubuntu for a couple years, Ubuntu GNOME for 7-8 years, and finally switched to Fedora last year.
A related issue I still see very often, even with files newly created just this year, is when trying to extract zip files on my Linux systems that contain non-ASCII filenames and that were created on Windows systems, especially ones with apparently non-English locales like Japanese. Need to trial and error the locale I give to unzip and sometimes hack together fixed names with iconv until the mojibake seems to fix itself.