I can confirm. Updated on my laptop and every extension works so far.

Use WSL on the laptop for ssh, that’s actually a VM. VM separation should work correctly, or we have a much bigger problem. Just reset WSL, everything should be wiped related to the ssh sessions. Work IT would maybe allow that.

Do we have an extension apocalipse again, or is it a “bump supported version” type update?

One of them is a laptop, why ssh to the server isn’t an option? Set up tmux on the server so it always connects to the same session, so you can just continue where you left last time. If you need desktop support, rdp in gnome works really well.

E.g if you connect with this command, and tmux is installed on the server, it will start a new session named “main”. If a session with that name exists it will connect to that:

ssh -t pi@192.168.1.2 tmux new-session -A -s main

Add something to .bashrc on the server to always do the same if you work on that phisically:

if command -v tmux &> /dev/null && [ -n "$PS1" ] && [[ ! "$TERM" =~ screen ]] && [[ ! "$TERM" =~ tmux ]] && [ -z "$TMUX" ]; then
tmux new-session
fi

Congratulations!

Small reminder, if you don’t remember from last time it was posted to all communities on lemmy, this is still a project by cryptobros:

What is the relationship between Radicle and the Radworks ($RAD) token?

Radicle is a true peer-to-peer protocol. It doesn’t use nor depend on any blockchain or cryptocurrency.

Radworks, the organization that has been financing Radicle is organized around the RAD token which is a governance token on Ethereum.

https://radicle.xyz/faq

@7heo@lemmy.ml reviewed it 6 months ago:

This doesn’t pass the smell test.

• Instructs to pipe the output of curl in sh
• Assumes that sh is bash [1]
• “Community” behind it is apparently originating in Berlin, and is now a “nonprofit foundation in Switzerland”, but has no publicly disclosed legal structure anymore.
• “Community” behind it uses discord, but not revolt, matrix, simplex or others.
• “Community” behind it uses twitter, but not mastodon.
• Cryptobros.

But it’s a Friendica post, not from Mastodon. You can’t write such a long posts on mastodon

That video is till up: https://www.youtube.com/watch?v=Vj04MKykmnQ

She went there, because in the support forum the manufacturer replied that they can only give the source code in person.

Actually that’s acceptable, and does not violate GPL, they just expected that noone will show up in their sweatshop. GPL does not define how you should make the source available.

Since I stopped using mainstream socialmedia I can’t follow musicians I’m interested in. Some have a bandcamp page and rss works there, but they just upload their albums there, nothing else. At least I get notified about new releases. I tried to follow facebook and instagram pages via rss-bridge, but it’s not working for years now. My selfhosted bibliogram sometimes work, but it’s unmaintained so it will die at some point if instagram changes something. (I just found there is a maintained fork, yess) My ip usually gets blocked, so I get all posts once a week only in batch.

So I’m interested, unfortunately none of them enabled fedi integration yet, (afaik it’s a settings for them in threads) so I’m waiting when they will enable it for everyone.

I don’t want to debate about politics or whatever you are afraid of.

There was a vote about it in !meta@lemm.ee : https://lemm.ee/post/851217

I wanted to vote against defederation (edit: i was offline that week or something, I can see I didn’t vote) I liked on this instance that we are treated as adults, and the admin let us decide what we want to see. You can block instances if you want. Defederating with Threads even before we can see how it would work goes against this philosophy.

Afaik there is no way to see anything from threads on lemmy yet, connection with mastodon like services work only, so we are again debating about a not yet existing thing.

If it will work between threads and lemmy I will look for another instance where I can devide what I want to see.

Iphone 4 had a shitty antenna design. This was the first iphone with a metal frame around, on the sides of the phone. If you holded it with your left hand you could easily accidentally short the two parts of the antenna, basically cutting all signals.

This was definetily a design fault, there was even class action lawsuit against Apple. When they asked Steve Jobs about this, he replied:

“You are holding it wrong.”

Antennagate happened 14 years ago. A lot users are too young to remember that

How this photo related to the fediverse? c/lostlemmings?

It’s true what you write, but it’s not related to Wayland/X11.

But this is the reason CAD software can’t use multiple cpu cores for geometry calculations. The next calculation needs the result of the previous one, it can’t be parallelized.

Buy a better case for the mobo. I modded once an mITX motherboard to an ancient HP Proliant microserver case, it’s not that hard. Mobos like this doesn’t have standard screw distances, but you don’t have to secure all screws in a ghetto server. 2 screws and some padding is enough, with 3 screws you are overengineering.

It’s a Fujitsu W26361 There isn’t a lot of info about it on the net, all the links are rotten.

You have a sata port. You have to use an external power supply for that. Or maybe one of the pins next to it can supply the required voltage, you can use a multimeter to figure it out if you are brave. I guess the white one labeled PWR should be supply some volts. To be safe you can split the power of the other sata ssd or buy something like this:

You also have 2 an mPCIe or mSATA port. It’s impossible to tell the difference from a photo, because they use the same connector.

https://en.wikipedia.org/wiki/PCI_Express#Mini-SATA_(mSATA)_variant

Without any more knowledge I would guess at least one of them is an mPCIe. Having 2 sata ports and an 2 mSATA next to it would be strange, they could use the mPCIe for a 3G modem or wifi, it would make more sense in a thin client like this.

If it’s an mPCIe you can buy a sata expansion there and even connect up to 4 sata drives. Looks like something like this:

You can convert it to normal PCIe or m.2, the possibilities are endless:

If it’s not mPCIe but mSATA, you can buy mSATA SSD there, they are really rare nowadays. Or you can buy an mSATA to SATA adapter:

I’m not familiar with linux mint, why?

Also they can switch to debian base relatively easily

I just read the article and they say exactly what I guessed:

“This approach would guarantee stability on the appointed release day, but was proving unpopular with consumers looking to adopt the latest features and hardware support as well as silicon vendors looking […] to align their Ubuntu support,” Canonical’s Brett Grandbois explains.

But to “provide users with the absolute latest in features and hardware support, Ubuntu will now ship the absolute latest available version of the upstream Linux kernel at the specified Ubuntu release freeze date, even if upstream is still in Release Candidate (RC) status.”

Maybe stability is not a frequent issue nowadays, and they need the new kernel to support new hardware more quickly?

E.g. I can imagine a new linux friendly laptop can’t be sold with ubuntu preinstalled because the old kernel is not supporting some parts yet, but it’s already merged upstream. Or something like that.

Search for “vfio single gpu”, It’s possible, but it has drawbacks. Iirc you have to run everything as root or something like that.

Another recommended way is to run a headless linux as host, and passthrough the gpu to a linux guest next to a windows guest, than you just switch between the guests

Yes that is another option. I know 7zip works there, win11 is mostly the same as win7 under the hood, but I would install a supported frontend instead of fiddling with the registry, tweaks like that can break after updates

I don’t use windows personally, just set it up for others. I don’t care enough to tweak the registry for them, if there are more convenient solutions