• 5 Posts
  • 44 Comments
Joined 1 year ago
cake
Cake day: July 22nd, 2025

help-circle

  • Ok, so the SFP cable would stay on the isp box. The internet signal would go through WAN into the new router for wireless, and the signal for wired ethernet would go through WAN into the new router, then back through WAN into the isp modem and out the SFP.

    I didn’t know the signal would go through WAN both ways and thought if the SFP cable was connected to the isp modem the signal just wouldn’t bother going through the new router. This stuffs confusing lol. I really appreciate you taking the time.





  • imminent_nebula@lemmy.caOPtoPrivacy@lemmy.ml•Router question
    link
    fedilink
    arrow-up
    1
    ·
    edit-2
    4 days ago

    OK that makes sense, thank you. WAN from bell to new router would cover the WiFi, then the blue cable into the new router, which would pass the signal back through the WAN line to the bell router and out the fiber line? Or would I need another cable to go LAN to LAN from new router to bell to get the signal to the fiber line? Does WAN go in both directions?

    Edit:

    and plug the blue ethernet into one of the new router’s LAN ports so that the new router is managing the ethernet for your home devices

    Wouldn’t that just completely bypass the Bell modem/router though?



  • wait, do you have 2 devices from your ISP? what kind(s) are they (make/model)

    No just the one. It’s a Bell Home Hub 3000. There’s a blue cable that plugs into LAN4, a telephone cable that plugs into TEL1 (both of these come from the junction box where the router/modem is), and white cable that plugs into a plug that’s closed off marked sfp, which then runs through the wall to a spot in the living room where I have an ethernet box that has a few devices connected by wired ethernet.

    I get that connecting a new router o the WAN port will run all wireless connections through the new router, but the white ethernet cable would still come out of the isp modem/router. I don’t understand how the wired ethernet would come from the new router.


  • Ok cool. So if I understand, the isp router is used as a modem, so instead of devices connecting to the isp modem/router, the new router sits between the connection so the isp modem/router goes to the new router, which connects to devices?

    So the main cable goes into the isp router on LAN4, I connect from WAN to my new router, and I assume I also need to swap the cable that goes from the isp router to my ethernet junction from the isp router to my new one, so ethernet also goes through the new one?


  • Ok, looks like my isp router doesn’t have bridge mode but using DMZ apparently works. Honestly it’s the basics that I’m not getting. The setup seems pretty general, I guess I have to keep my isp router as a modem and connect the new router to the WAN on the isp modem/router. That makes sens but there’s another wire from the isp modem/router that goes to an ethernet box. Wouldn’t that bypass my new router? Would I have to swap the ethernet wire to the new one?


  • Ok, looks like my isp router doesn’t have bridge mode but using DMZ apparently works. Honestly it’s the basics that I’m not getting. The setup seems pretty general, I guess I have to keep my isp router as a modem and connect the new router to the WAN on the isp modem/router. That makes sens but there’s another wire from the isp modem/router that goes to an ethernet box. Wouldn’t that bypass my new router? Would I have to swap the ethernet wire to the new one?









  • First, this makes more sense, thanks for the write up. Second, I really wish I knew this stuff when I went head first into fuck Microsoft mode (I have a feeling I’m gonna be resetting my main PC at some point to do it right, and really dreading that). I have an old laptop returning to me that I’m gonna throw Nix on and fuck with it.


  • Mind giving a bit of a breakdown of why? I’m new to Linux and heard a lot about docker (I think its like separate boxes for an apps?) after I switched and it just seemed too much at the time so I’ve put it on the back burner (was stotally new to terminal stuff).

    I’m about to try rigging up an old laptop for self hosting and trying to learn. Was thinking of figuring out docker first before trying immich, keepass, calendar with calDAV and it’s all pretty overwhelming lol.


  • Same as I do for music. I use Calibre and do a lot of manual organization. My tree looks like this:

    King, Stephen/

    Christine/
    
        Christine.epub
    
    Dark Tower, The - 01 - Gunslinger, The/
    
        Dark Tower, The - 01 - Gunslinger, The.epub
    
    Dark Tower, The - 02 - Drawing of the Three, The/
    
        Dark Tower, The - 02 - Drawing of the Three, The.epub
    
    Needful Things/
    
        Neefdul Things.epub
    

    Of course, most of my books are fiction so I don’t use genres, but now I’m rethinking that lol.